LQG-1

Short Description:

Description:
SHIYUN stainless steel tensioning tool, item No. LQG-1, for stainless steel ties of width 2.4~9.0mm, utilizes manual operation to tension and cut off stainless steel tie. Tensioning tools provides consistent use over many cycles and ergonomic non-slip cushioned handles for comfort and control.
– Recommended stainless steel ties: Width up to 0.35 inch (9.0mm) ; Thickness up to 0.01 inch ( 0.3 mm)


Product Detail

Product Tags

Specification:

Blade Material: 65 Manganese Steel
Handle Material: TPR
Length: 205mm
Weight: 0.595kg
Application Range: Applied for stainless steel with width 2.4~9mm, thickness up to 0.3mm.

Basic Data

Suitable for stainless steel cable ties of width 2.4mm to 9.0mm
Feature: Fast fastening wires and cables and automatically cut off the left part; simple to operate.

SPECIFICATION

Suitable for stainless steel cable ties of width 2.4mm to 9.0mm
Feature: Fast fastening wires and cables and automatically cut off the left part; simple to operate.
Material: Metal
Length: 205mm
Weight: 0.595kg

Using Steps

1. First thread the rail into the head of the cable tie.
2. Adjust the wheel to the required tension for the cable tie.
3. Place the tail and shaft of the cable tie into the solt at the tip of the gun barrel.
4. Push the tie as far back onto the gun base as possible. The head must be touching the gun tip outside the tool.
5. Squeeze the handle of the gun to pull the tie through the head making sure the head of the tie is always touching the tip of the gun.
6. Keep pulling the handle until the tie is securely fastened around the desired object.
7. The gun will automatically cut the excess tie off when it reaches maximum tension.

Our Service Guarantee

Our Service Guarantee

  • Previous:
  • Next: